Engineering Transactions, 64, 2, pp. 241–252, 2016

Mechanical and Metallurgical Characterization of Dissimilar Weld Joints Using Continuous Direct Drive Friction Welding

Sathish RENGARAJAN
SCSVMV University
India

Vaddi Seshagiri RAO
St. Joseph’s College of Engineering

This paper presents studies on continuous direct drive friction welded joints made of low and medium carbon steels. The fractured specimen was examined using a scanning electron microscope and it consisted of fine dimples which showed the mode of ductile fracture. Plasticity which is indicative of the flow of grains was better observed in the low carbon steel side than in the medium carbon steel side. Light microscopy revealed the flow of fine grained austenite partially transformed into a marten-site structure which exhibits more tensile strength. X-ray diffraction test confirmed that the chromium in the weldments is consistently spread and improves corrosion resistance properties.
Keywords: dissimilar metals; martensite ductile fracture; light microscopy
Full Text: PDF

References

Amudarasan N.V., Palanikumar K., Shanmugam K., Impact behaviour and micro structural analysis of AISI 316L stainless steel weldments, International Journal of Application or Innovation in Engineering & Management, 2(6): 269–272, 2013.

Ananthapadmanaban D., SeshagiriRaov V.,Vijayan D., Muthu Vaidyanathan R., Prasad Rao K., A review of friction welding processes in similar and dissimilar materials. International Journal of Design and Manufacturing Technologies, 3(2): 68–72, 2009.

Cui Y., Lundin C.D., Hariharan V., Mechanical behaviour of austenitic stainless steel weld metals with microfissures, Journal of Materials Processing Technology, 171(1): 150–155, 2006.

Datta S., Bandyopadhyay A., Pal P.K., Grey-based Taguchi method for optimization of bead geometry in submerged arc bead-on-plate welding, International Journal of Advanced Manufacturing Technology, 39(11): 1136–1143, 2008.

Dhananjayulu A., Ratnesh Kumar R.S., Dwivedi D.K., Mehta N.K., Effects of friction stir welding on microstructural and mechanical properties of copper alloy, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5(2): 336–344, 2011.

Kurt H.I., Samur R., Study on microstructure, tensile test and hardness of 316 stainless steel jointed by TIG welding, International Journal of Advances in Engineering, Science and Technology, 3(1): 1–6, 2013.

Kožuh S., Gojić M., Kraljić Roković M., The effect of PWHT on electrochemical behaviour of AISI 316L weld metal, Chemical and Biochemical Engineering Quarterly, 22(4): 421–431, 2008.

Lienert T.J., Stellwag W.L., Grimmett B.B., Warke R.W., Friction stir welding studies on mild steel. Welding Journal, Research Supplement, 1: 1–9, 2003.

Molak R.M., Paradowski K., Ciupiński Ł., Pakiela Z., Brynk T., Kurzydłowski K.J., Measurement of mechanical properties in a 316L stainless steel welded joint, International Journal of Pressure Vessels and Piping, 86(1): 43–47, 2009.

Reynolds A.P., Tang W., Gnaupel-Herold T., Prask H., Structure, properties, and residual stress of 304L stainless steel friction stir welds, Scripta Materialia, 48 (9): 1289–1294, 2003.

Satyanarayana V.V., Madhusudhan Reddy G., Mohandas T., Dissimilar metal friction welding of austenitic-ferritic stainless steel, Journal of Material Processing Technology, 160(2): 128–137, 2005.

Sourmail T., Precipitation in creep resistant austenitic stainless steels, Materials Science and Technology, 17(1): 1–14, 2001.

Kožuh S., Gojić M., Kosec L., The effect of annealing on properties of AISI 316L base and weld metals, RMZ – Materials and Geoenvironment, 54(3): 331–344, 2007.

Liptáková T., Alaskari A., Halamová M., Surface treatment of the AISI 316L after welding and study of corrosion. Periodica Polytechnica, Transporation Engineering, 41(2): 143–147, 2013.

Vill V.I., Friction welding of metals. New York American Welding Society, New York, 1962.




Copyright © 2014 by Institute of Fundamental Technological Research
Polish Academy of Sciences, Warsaw, Poland