Engineering Transactions, 63, 3, pp. 273–296, 2015

An Alternative Approach to Initial Stability Analysis of Kirchhoff Plates Resting on Internal Supports by the Boundary Element Method

Michał Jan GUMINIAK
http://www.se.put.poznan.pl/michal.guminiak
Poznan University of Technology, Institute of Structural Engineering
Poland

An initial stability of Kirchhoff plates supported on boundary and resting on internal supports is analysed in this paper. The internal supports are understood to be part of a plate surface or a line belonging to the plate. The proposed approach avoids Kirchhoff forces at the plate corner and equivalent shear forces at the plate boundary. Two unknown and independent variables are always considered at a boundary element node depending on the type of a plate edge such as the shear force and bending moment for a clamped edge, and the shear force and angle of rotation in normal direction for a simply-supported edge. For a free edge, the deflection and angle of rotation in normal direction are considered as two independent variables with additional angle of rotation in tangent direction which depends on boundary deflections. The two governing integral equations are derived using Betti’s theorem. These equations have the form of boundary-domain integral equations. The constant type of boundary element is used. The singular and non-singular formulations of the boundary-domain integral equations with one and two collocation points associated with a single boundary element located slightly outside of a plate edge are presented. To establish a plate curvature by double differentiation of the basic boundary-domain integral equation, the plate domain is divided into rectangular subdomains associated with suitable collocation points. According to the alternative approach, a plate curvature is also established by considering three collocation points located in close proximity to each other along a line parallel to one of the two axes of global coordinate system and establishment of appropriate difference operators.
Keywords: boundary element method; Kirchhoff plates; initial stability; fundamental solution.
Full Text: PDF

References

Burczyński T., The Boundary Element Method in Mechanics, Technical-Scientific Publishing house, Warszawa, 1995 (in Polish).

Altiero N. J., Sikarskie D. L., A boundary integral method applied to plates of arbitrary plane form, Computers and Structures 9, 163–168, 1978.

Bèzine G., Gamby D. A., A new integral equations formulation for plate bending problems, Advances in Boundary Element Method, Pentech Press, London, 1978.

Stern M., A general boundary integral formulation for the numerical solution of plate bending problems, International Journal od Solids and Structures, 15, 769–782, 1978.

Hartmann F., Zotemantel R., The direct boundary element method in plate bending, International Journal of Numerical Method in Engineering, 23, 2049–2069, 1986.

Abdel-Akher A., Hartley G. A., Evaluation of boundary integrals for plate bending. International Journal of Numerical Method in Engineering, 28, 75–93, 1989.

Debbih M., Boundary element method versus finite element method for the stress analysis of plates in bending, MSc Thesis, Cranfield Institute of Technology, Bedford, 1987.

Debbih M., Boundary element stress analysis of thin and thick plates, PhD Thesis, Cranfield Institute of Technology, Bedford, 1989.

Beskos D. E., Dynamic analysis of plates by boundary elements, Applied Mechanics Review, 7, 26, 213–236, 1999.

Wen P. H., Aliabadi M. H., Young A., A boundary element method for dynamic plate bending problems, International Journal od Solids and Structures, 37, 5177–5188, 2000.

Katsikadelis J. T., A boundary element solution to the vibration problem of plates, Journal of Sound and Vibration, 141, 2, 313–322, 1990.

Katsikadelis J. T., A boundary element solution to the vibration problem of plates, International Journal of Solids and Structures, 27, 15, 1867–1878, 1991.

Katsikadelis J. T., Yotis A. J., A New boundary element solution of thick plates modelled by Reissner's theory, Engineering Analysis with Boundary Elements, 12, 1, 65–74, 1999.

Katsikadelis J. T., Sapountzakis E. J., Zorba E. G., A BEM Approach to Static and Dynamic Analysis with Internal Supports, Computational Mechanics, 7, 1, 31–40, 1990.

Katsikadelis J. T., Kandilas C. B., A flexibility matrix solution of the vibration problem of plates based on the Boundary Element Method, Acta Mechanica, 83, 1–2, 51–60, 1990.

Katsikadelis J. T., Sapountzakis E. J., A BEM Solution to dynamic analysis of plates with variable thickness, Computational Mechanics, 7 (5–6), 369–379, 1991.

Wrobel L. C., Aliabadi M. H., The Boundary Element Methods in Engineering. McGraw-Hill College. ISBN 0–07–707769–5, 2002.

Litewka B., Analysis of Reissner plates by the boundary element method with interaction with liquid, Doctoral dissertation (in Polish), Poznan University of Technology, Faculty of Civil and Environmental Engineering, 2007.

Litewka B., Sygulski R., Application of the fundamental solutions by Ganowicz in a static analysis of Reissner’s plates by the boundary element method, Engineering Analysis with Boundary Elements, 34, 1072–1081, 2010.

Ganowicz R., Selected problems of theory of Reissner and three layer plates, Theoretical and Applied Mechanics, 3–4, 55–95 (in Polish), 1966.

Shi G., Flexural vibration and buckling analysis of orthotropic plates by the boundary element method, International Journal of Solids and Structures, 12, 26, 1351–1370, 1990.

Ptaszny, J., Fast multipole boundary element method for the analysis of plates with many holes, Archives of Mechanics, 59,4–5, 385–401, 2007.

Rashed Y. F., A coupled BEM-flexibility force method for bending analysis of internally supported plates, International Journal for Numerical Method in Engineering, 54, 1431–1475, 2002.

Guminiak M., Sygulski R., Stateczność początkowa płyt cienkich w ujęciu metody elementów brzegowych, X Sympozjum Stateczności Konstrukcji, 173–180, redakcja naukowa: K. Kowal-Michalska, Z. Kołakowski, Zakopane, 8–12. września, 2003.

Guminiak M., Sygulski R., Vibrations of system of plates immersed in fluid by BEM, Proceedings of IIIrd European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering ECCM-2006, pp. 211, eds.: C. A. Mota Soares, J. A. C. Rodrigues, J. A. C. Ambrósio, C. A. B. Pina, C. M. Mota Soares, E. B. R. Pereira and J. Folgado, CD enclosed, June 5–9, 2006, Lisbon, Portugal.

Guminiak M., Sygulski R., Initial stability of Kirchhoff plates by the boundary element method using a modified formulation of a boundary condition, Foundations of Civil and Environmental Engineering, 7, 171–186, 2006.

Guminiak M., Sygulski R.: The analysis of internally supported thin plates by the Boundary Element Method. Part 1 – Static analysis, Foundation of Civil and Environmental Engineering, 9, 17–41, 2007.

Guminiak M., Sygulski R., The analysis of internally supported thin plates by the Boundary Element Method. Part 2 – Free vibration analysis, Foundation of Civil and Environmental Engineering, 9, 43–74, 2007.

Guminiak M., Jankowiak T., The analysis of internally supported thin plates by the Boundary Element Method. Part 3 – Initial stability analysis, Foundations of Civil and Environmental Engineering, 10, 51–67, 2007.

Guminiak M., Initial stability analysis of plates considering continuous internal supports by BEM, Scientific Research of the Institute of Mathematic and Computer Science, 1, 8, 47–62, 2009.

Guminiak M., An Alternative Approach of Initial Stability Analysis of Kirchhoff Plates by the Boundary Element Method, Engineering Transactions, 62, 1, 33–59, 2014.

Myślecki K., Approximate fundamental solutions of equilibrium equations for thin plates on an elastic foundation, Archives of Civil and Mechanical Engineering, 1, 4, 2004.

Myślecki K., Metoda elementów brzegowych w statyce dźwigarów powierzchniowych, Oficyna Wydawnicza Politechniki Wrocławskiej, (in Polish), Wrocław 2004.

Myślecki K., Oleńkiewicz J., Analiza częstości drgań własnych płyty cienkiej Metodą Elementów Brzegowych, Problemy naukowo-badawcze budownictwa, Wydawnictwo Politechniki Białostockiej, Białystok, 2, 511–516 (in Polish), 2007.

Oleńkiewicz J., Analiza drgań wybranych dźwigarów powierzchniowych metodą elementów brzegowych, Rozprawa doktorska, Politechnika Wrocławska, Instytut Inżynierii Lądowej, 2011.

Katsikadelis J.T., ΣYNOPIAKA ΣTOIXEIA, Toμoς II: Aνάλυση Πλακών, 2η Eκδoση, EMΠ 2010 (Katsikadelis J.T., Boundary Elements: Vol. II, Analysis of Plates, Second Edition, NTUA, Athens, 260, 2010).

Katsikadelis J.T., The Boundary Element Method for Plate Analysis, Elsevier, 2014.

Katsikadelis J.T., The analog equation method. – A powerful BEM-based solution technique for solving linear and nonlinear engineering problems, in: Brebbia C.A. (ed.), Boundary Element Method XVI: 167–182, Computational Mechanics Publications, Southampton, 1994.

Nerantzaki M.S., Katsikadelis J.T., Buckling of plates with variable thickness – An Analog Equation Solution, Engineering Analysis with Boundary Elements, 18, 2, 149–154, 1996.

Chinnaboon B., Chucheepsakul S. and Katsikadelis, J.T., A BEM–based Meshless Method for Buckling Analysis of Elastic Plates with Various Boundary Conditions, International Journal of Structural Stability and Dynamics, 7, 1, 81–89, 2007.

Babouskos N., Katsikadelis J.T., Flutter instability of damped plates under combined conservative and nonconservative loads, Archive of Applied Mechanics, 79, 541–556, 2009.

Katsikadelis J.T., Babouskos N.G., Nonlinear flutter instability of thin damped plates: A solution by the analog equation method, Journal of Mechanics of Materials and structures, 4 (7–8), 1395–1414, 2009.

Girkmann K., Plane Girders (in Polish), Warszawa, Arkady, 1957.

Timoshenko S., Woinowsky-Krieger S., Theory of elstic stability, Warszawa, Arkady, 1962.




Copyright © 2014 by Institute of Fundamental Technological Research
Polish Academy of Sciences, Warsaw, Poland