Engineering Transactions, 64, 4, pp. 473–484, 2016
10.24423/engtrans.744.2016

A Novel Hybrid Spraying Method for Obtaining High Quality Coatings

Bożena SZCZUCKA-LASOTA
University of Occupational Safety Management in Katowice
Poland

Zbigniew STANIK
Silesian University of Technology
Poland

Wojciech TARASIUK
Bialystok University of Technology
Poland

Dariusz SIETESKI
Silesian University of Technology
Poland

The aim of this study is to present the development of the hybrid method, and its possible applications, advantages and limitations. The new elaborated method of spraying can be applied for the production of coatings working in an aggressive environment. In the paper, the corrosion-erosion resistance of coatings obtained by the hybrid method is presented. The structure and chemical composition of coatings are obtained by the scanning electron microscopy (SEM). The made samples were subject to cyclic corrosion test in air and at high temperature of 650°C. The changes in mass of samples in time were measured and the curve of the course of corrosion processes was specified. In this paper, the results of abrasion test on T07 stand and erosion tests under a load of 200 g in ambient and elevated temperature are presented. The presented results confirm the correctness of chosen parameters of a new, elaborated and innovative hybrid method.
Keywords: hybrid method; spraying system; coatings
Full Text: PDF
Copyright © Polish Academy of Sciences & Institute of Fundamental Technological Research (IPPT PAN).

References

Song Y., Lv Z., Liu Y., Zhuan X., Wang T.J., Effects of coating spray speed and convective heat transfer on transient thermal stress in thermal barrier coating system during the cooling process of fabrication, Applied Surface Science, 324: 627–633, 2015, DOI: 10.1016/j.apsusc.2014.10.157.

Wielage B., Pokhmurska H., Student M., Gvozdeckii V., Stupnyckyj T., Pokhmurskii V., Iron-based coatings arc-sprayed with cored wires for applications at elevated temperatures, Surface and Coatings Technology, 220: 27–35, 2013, DOI: 10.1016/j.surfcoat.2012.12.013.

Hanson T.C., Settles G.S., Particle temperature and velocity effects on the porosity and oxidation of an HVOF corrosion-control coating, Journal of Thermal Spray Technology, 12(3): 403–415, 2003, DOI: 10.1361/105996303770348276.

Tarasiuk W., Szczucka-Lasota B., Piwnik J., Majewski W., Tribological properties of super field weld with micro-jet process, Advanced Materials Research, 1036: 452–457, 2014, DOI: 10.4028/www.scientific.net/AMR.1036.452.

Oksa M., Turunen E., Suhonen T., Varis T., Hannula S.P., Optimization and characterization of high velocity oxy-fuel sprayed coatings: techniques, materials, and applications, Coatings, 1(1): 17–52, 2011, DOI: 10.3390/coatings1010017.

Szymański K., Hernas A., Moskal G., Myalska H., Thermally sprayed coatings resistant to erosion and corrosion for power plant boilers – a review, Surface and Coatings Technology, 2014, DOI: 10.1016/j.surfcoat.2014.10.046.

Gorlach A., Evaluation of the HVAF thermal sprayed coating, Research and Development (R&D) Journal of the South African Institution of Mechanical Engineering, 24(3): 4–8, 2008, http://www.saimeche.org.za/?page=RD_2008.

Zurecki Z., Ghosh R., Mebrahtu T., Thayer M.J., Stringer S.R., Automated substrate cooling system for HVOF coating operations, [in:] E. Lugscheider (Ed.), Air Products & Chemicals, Maastricht, Netherlands, 2008.

Ghosh R., Cryogenic nitrogen gas cooling for thermal spray coatings, Spraytime, 14(4): 2–4, 2007.

Fauchais P., Vardelle A., Thermal sprayed coatings used against corrosion and corrosive wear [in:] H.S. Jazi (Ed.), Advanced Plasma Spray Applications, ISBN 978-953-51-0349-3, 2012, © The Author(s), CC BY 3.0, http://www.intechopen.com/books/advanced-plasma-spray-applications/thermal-sprayed-coatings-usedagainst-corrosion-and-corrosive-wear, 2012.

Węgrzyn T., Piwnik J., Łazarz B., Hadryś D., Main micro-jet cooling gases for steel welding, Archives of Metallurgy and Materials, 58(2): 555–557, 2013.

Szczucka-Lasota B., Szymański K., The selected tribological and structural properties of protective coatings obtained by different methods, Solid State Phenomena, 246: 81–84, 2016, DOI: 10.4028/www.scientific.net/SSP.246.81.

Mrowec S., Werber T., Korozja gazowa (Gases Corrosion), Katowice, Polska, 1996.

Węgrzyn T., Piwnik T., Wieszała J., Hadryś D., Control over the steel welding structure parameters by micro-jet cooling, Archives of Metallurgy and Materials, 57(3): 679–685, 2012, DOI: 10.2478/v10172-012-0073-9.

Hadryś D., Węgrzyn T., Piwnik J., The effect of different micro-jet streams number on plastic properties of welds, Archives of Metallurgy and Materials, 60(3): 1617–1622, 2015, DOI: 10.1515/amm-2015-0282.

Hadryś D., Piwnik J., Węgrzyn T., Łazarz B., Coefficient of restitution and plastic strain for impact of elements welded with micro-jet cooling, Transport Problems, 9(2): 61–68, 2014.




DOI: 10.24423/engtrans.744.2016