Engineering Transactions, Online first

Moisture Management Finish on Single and Rib Knit Cotton

Mehreen IJAZ
Lahore College for Women University

Namood -e- SAHAR
Lahore College for Women University

Lahore College for Women University

Lahore College for Women University

Lahore College for Women University

Madeeha TARIQ
Lahore College for Women University

Hibba Munir DAR
Lahore College for Women University

The present study aimed to determine the effect of moisture transmission finish on the performance of knitted cotton fabrics in terms of their tensile strength and moisture transmission behavior. Two groups: single and rib-knit cotton fabrics were collected from Nishat Mills Limited. A moisture management finish was applied onto the collected fabrics. The effect of the applied finish was investigated against their moisture transmission behavior by following the AATCC 195-2009 test procedure. The tensile strength was also evaluated with the ASTM D 5035-11 test method. The difference was studied between finished and unfinished samples. It was concluded that the moisture transmission finish has decreased the absorption rate and spreading speed of water through/in treated fabrics as compared to untreated fabrics. Moreover, breaking load and elongation of knitted fabrics in both directions were also improved with the application of finish.
Keywords: moisture management finish; wicking action; absorbent behavior; single knit; rib knit
Full Text: PDF
Copyright © The Author(s). This is an open-access article distributed under the terms of the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).


Mikučionienė D., Milašienė D., The influence of knitting structure on heating and cooling dynamic, Medžiagotyra, 19(2): 174–177, 2013, doi: 10.5755/

Sarika D.S., Shakya M.K., Analysis of moisture management parameters in the woven cotton fabrics after chemical treatment with moisture management finishes, International Journal of Science and Research, 6(8): 1159–1162, 2017,

Singh K.V.P., Chatterjee A., Das A., Study on physiological comfort of fabrics made up of structurally modified friction-spun yarns: Part II-liquid transmission, Indian Journal of Fibre and Textile Research, 35(2): 134–138, 2010.

Ozen I., Multi-layered breathable fabric structures with enhanced water resistance, Journal of Engineered Fibers and Fabrics, 7(4): 63–67, 2012, doi:10.1177/155892501200700402.

Badrul Hasan M.M., Dutschk V., Calvimontes A., Hoffmann G., Heinrich G., Cherif C., Influence of the cross-sectional geometry on wettability and cleanability of polyester woven fabrics, Tenside Surfactants Detergents, 45(5): 274–279, 2008, doi: 10.3139/113.100386.

Hussain T., Nazir A., Masood R., Liquid moisture management in knitted textiles – a review, [In:] Proceedings of 3rd International Conference on Value Addition & Innovation in Textiles (Covitex-2015),27-28 March 2015, National Textile University Faisalabad Pakistan, pp.15–26, 2015, doi: 10.13140/RG.2.1.1898.0966.

Uyanik S., Examining absorbency properties of the pile loop knitted fabrics with moisture management tester, International Advanced Researches and Engineering Journal, 2(2): 159–166, 2018,

Alam M.M., Chowdhury M.A., Sabnam E.J., Islam M.S., Improvement of moisture management of polyester fabric using moisture management chemical, International Journal of Engineering Technology, Management and Applied Sciences, 5(8): 71–78, 2017.

Onofrei E., Rocha A.M., Catarino A., The influence of knitted fabrics’ structure on the thermal and moisture management properties, Journal of. Engineering Fibres and Fabrics, 6(4): 10–22, 2011, doi: 10.1177/155892501100600403.

Prakash C., Ramakrishnan G., Koushik C.V., Effect of blend proportion on moisture management characteristics of bamboo/cotton knitted fabrics, The Journal of The Textile Institute, 104(12): 1320–1326, 2013, doi: 10.1080/00405000.2013.800378.

Sampath M.B., Aruputharaj A., Senthilkumar M., Nalankilli G., Analysis of thermal comfort characteristics of moisture management finished knitted fabrics made from different yarns, Journal of Industrial Textiles, 42(1): 19–33, 2012, doi: 10.1177/1528083711423952.

Senthilkumar M., Sampath M.B., Ramachandran T., Moisture management in an active sportswear: techniques and evaluation, Journal of the Institution of Engineers(India): Series E, Chemical and Textile Engineering, 93(2): 61–68, 2013, doi: 10.1007/s40034-013-0013-x.

Karnoub A., Makhlouf S., Kadi N., Azari Z., Comparison mechanical properties for fabric (woven and knitted) supported by composite material, Journal of Textile Science and Engineering, 5(4): 15–21, 2015, doi: 10.4172/2165-8064.1000206.

Eltahan, E., Effect of lycra percentages and loop length on the physical and mechanical properties of single jersey knitted fabrics, Journal of Composites, 2016: Article ID 3846936, 2016, doi: 10.1155/2016/3846936.

ASTM D1776, Standard practice for conditioning and testing textiles, West Conshohocken, 2010.

AATCC 195, Liquid Moisture Management Properties of Textile Fabrics, American Association of Textile Chemists and Colorists, 2009.

ASTM D 5035, Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method), West Conshohocken, 2011.

Senthilkumar M., Anbumani N., Hayavadana J., Elastane fabrics – A tool for stretch applications in sports, Indian Journal of Fibre & Textile Research, 36(3): 300–307, 2011,

Sitotaw D.B., Adamu B.F., Tensile properties of single jersey and 1× 1 rib knitted fabrics made from 100% cotton and cotton/lycra yarns, Journal of Engineering, 2017: Article ID 4310782, 2017, doi: 10.1155/2017/4310782.

Nazir A., Hussain T., Zia Q., Afzal M.A., Improving thermo-physiological comfort of polyester/cotton knits by caustic and cellulases treatments, AUTEX Research Journal, 14(3): 200–204, 2014, doi: 10.2478/aut-2014-0034.

Khan M.Z., Hussaın S., Sıddıque H.F., Bahetı V., Mılıtky J., Azeem M., Alı A., Improvement of liquid moisture management in plaited knitted fabrics, Textile and Apparel, 28(3): 182–188, 2018.

Yanılmaz M., Kalaoğlu F., Investigation of wicking, wetting and drying properties of acrylic knitted fabrics, Textiles Research Journal, 82(8): 820–831, 2012, doi: 10.1177/0040517511435851.

Černe L., Simončič B., Influence of repellent finishing on the surface free energy of cellulosic textile substrates , Textile Research Journal, 74(5): 426–432, 2004, doi: 10.1177/004051750407400509.

Peršin Z., Stana-Kleinschek K., Sfiligoj-Smole M., Kre T., Ribitsch V., Determining the surface free energy of cellulose materials with the powder contact angle method, Textile Research Journal, 74(1): 55–62, 2004, doi: 10.1177/004051750407400110.

Peters T., Fay W., Composite yarns and moisture management fabrics made therefrom. U.S. Patent Application, No. 10/112,957, 2003.

Sampath M.B., Aruputharaj A., Senthilkumar M., Nalankilli G., Analysis of thermal comfort characteristics of moisture management finished knitted fabrics made from different yarns, Journal of Industrial Textiles, 42(1): 19–33, 2012, doi: 10.1177/1528083711423952.

DOI: 10.24423/EngTrans.2271.20230102