Engineering Transactions, 67, 1, pp. 119–131, 2019

Behavior of Concrete Reinforced with Fibers from End-of-Life Tires Under High Compressive Strain Rates

Małgorzata PAJAK
Silesian University of Technology

Military University of Technology

Military University of Technology

The behavior of concrete reinforced with the fibers obtained from the end-of-life tires under high compressive strain rates was the scope of this research. The laboratory investigations were performed using the Hopkinson Pressure Bar with a diameter of 40 mm. The waste fibers with untypical geometrical parameters were applied to concrete with a dosage of 30 kg/m3. The pronounced increase of compressive strength of the RSFRC, when subjected to high strain rates, was observed. The strain rate sensitivity of the RSFRC expressed by DIF was comparable to the other results presented in the literature.
Keywords: Hopkinson bar; fiber reinforced concrete; fibers from end-of-life tires; high compressive strain rates
Full Text: PDF


Bragov A.M., Petrov Y.V., Karihaloo B.L., Konstantinov A.Y., Lamzin D.A., Lomunov A.K., Smirnov I.V., Dynamic strengths and toughness of an ultra high performance fibre reinforced concrete, Engineering Fracture Mechanics, 110: 477–488, 2013.

Brandt A.M., Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering, Composite Structures, 86: 3–9, 2008.

Sovják R., Vavŕiník T., Zatloukal J., Máca P., Mičunek T., Frydrýn M., Resistance of slim UHPFRC targets to projectile impact using in-service bullets, International Journal of Impact Engineering, 76, 166–177, 2015.

Zanuy C., Ulzurrún G.S.D., Rate effects of fiber-reinforced concrete specimens in impact regime, Procedia Engineering, 193, 501–508, 2017.

Groli G., Caldentey A.P., Marchetto F., Fernández F.A., Serviceability performance of FRC columns under imposed displacements: An experimental study, Engineering Structures, 101: 450–464, 2015.

Pająk M., Application of fibers from end-of-life tires as a self-compacting concrete reinforcement – an experimental study, Architecture Civil Engineering Environment, 11: 105–113, 2018.

Wang Y., Wang Z., Liang X., An M., Experimental and numerical studies on dynamic compressive behavior of reactive powder concretes, Acta Mechanica Solida Sinica, 21(5): 420–430, 2008.

Wang S., Zhang M-H., Quek S.T., Mechanical behavior of fiber-reinforced high-strength concrete subjected to high strain-rate compressive loading, Construction and Building Materials, 31: 1–11, 2012.

Rong Z., Sun W., Zhang Y., Dynamic compression behavior of ultra-high performance cement based composites, International Journal of Impact Engineering, 37(5): 515–520, 2010.

Ju Y., Liu H.B., Sheng G.H., Wang H.J., Experimental study of dynamic mechanical properties of reactive powder concrete under high-strain-rate impacts, Science China Technological Sciences, 53: 2435–2449, 2010.

Lai J., Sun W., Dynamic behaviour and visco-elastic damage model of ultra-high performance cementitious composite, Cement and Concrete Research, 39: 1044–1051, 2009.

Jiao C., Sun W., Impact resistance of reactive oowder concrete, Journal of Wuhan University of Technology-Mater. Sci. Ed., 30: 752–757, 2015.

Wu Z., Shi C., He W., Wang D., Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements, Cement and Concrete Composites, 79, 148–157, 2017.

Denisiewicz A., Kuczma M., Two-scale modelling of reactive powder concrete. Part III: Experimental tests and validation, Engineering Transactions, 6(1): 55–76, 2015.

Adamczyk R., Łodygowski T., Numerical modelling of laboratory test of plain concrete under uniaxial impact compression, Engineering Transactions, 51(4): 381–398, 2003.

Kruszka L., Moćko W., Fenu. L., Cadoni E., Comparative experimental study of dynamic compressive strength of mortar with glass and basalt fibres, EPJ Web of Conferences, 94, 05008, 2015, doi: 10.1051/epjconf/20159405008.

Hao Y., Hao H., Dynamic compressive behaviour of spiral steel fibre reinforced concrete in split Hopkinson pressure bar tests, Construction and Building Materials, 48: 521–532, 2013.

Yoo D.-Y., Banthia N., Yoon Y.-S., Impact resistance of ultra-high performance fiber-reinforced concrete with different steel fibers, 9th RILEM International Symposium on Fiber Reinforced Concrete – BEFIB, 2016.

Curosu I., Mechtcherine V., Forni D., Cadoni E., Performance of various strain-hardening cement-based composites (SHCC) subject to uniaxial impact tensile loading, Cement and Concrete Research, 102: 16–28, 2017.

Forquin P., Lukic B., Experimental techniques to characterize the mechanical behaviour of ultra-high-strength-concrete under extreme loading conditions, [in:] Dynamic Behavior of Materials, Volume 1: Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, B. Song, L. Lamberson, D. Casem, J. Kimberley (Eds), pp. 229–237, 2016, doi: 10.1007/978-3-319-22452-7_32.

Massaq A., Rusinek A., Klósak M., Boulouz A., Koutti L, Analysis of the composite material behaviour subjected to dynamic bending using the Hopkinson bar, Engineering Transactions, 64(1): 115–131, 2016.

Pająk M., Dynamic response of SFRC under different strain rates – an overview of test results, 7th International Conference Analytical Models and New Concepts in Concrete and Masonry Structures, 2011, Kraków.

Pająk M., The influence of the strain rate on the strength of concrete taking into account the experimental techniques, Architecture Civil Engineering Environment, 3: 77–86, 2011.

DOI: 10.24423/EngTrans.941.20190124

Copyright © 2014 by Institute of Fundamental Technological Research
Polish Academy of Sciences, Warsaw, Poland