| Issue | Title | |
| Vol 49, No 2-3 (2001) | On Observation of Slow Ultrasonic Waves in Cancellous Bones | Abstract PDF |
| J. Kubik, M. Kaczmarek, M. Pakuła | ||
| Vol 55, No 1 (2007) | On Pulsatile Hydromagnetic Flow of an Oldroyd Fluid With Heat Transfer | Abstract PDF |
| S. SRINIVAS, T. MALATHY, P. L. SACHDEV | ||
| Vol 44, No 3-4 (1996) | On Regularization of Plastic Flow Localization in a Soil Material | Abstract PDF |
| M. Lengnick, T. Łodygowski, P. Perzyna, E. Stein | ||
| Vol 65, No 1 (2017) | On Shape and Material Optimization of Isotropic Bodies | Abstract PDF |
| Sławomir CZARNECKI, Tomasz LEWIŃSKI, Paweł WAWRUCH | ||
| Vol 49, No 4 (2001) | On the Behavior of a Bolt–Nut Joint with Plastically Deformed Thread | Abstract PDF |
| J. Z. Malinowski, J. Ostapkowicz | ||
| Vol 43, No 3 (1995) | On the Consistency Coefficient of a Power-Law Flow of Blood Through the Narrow Vessel | Abstract PDF |
| H.P. Mazumdar, U.N. Habishayasi, S. Ghorai, B.C. Roy | ||
| Vol 49, No 4 (2001) | On the Efficiency of the Soil Digging Processes | Abstract PDF |
| J. Maciejewski, A. Jarzębowski, W. Trąmpczyński | ||
| Vol 43, No 1-2 (1995) | On the Energetically Most Efficient Trajectories for the Heavy Machine Shoving Process | Abstract PDF |
| A. Jarzębowski, J. Maciejewski, D. Szyba, W. Trąmpczyński | ||
| Vol 47, No 3-4 (1999) | On the Machine Tool Substitutive Model Creation, Supported by the Finite Element Method | Abstract PDF |
| K.J. Kaliński, T. Kucharski | ||
| Vol 45, No 3-4 (1997) | On the Modelling of Laser Thermal Fracturing of Hard Rock | Abstract PDF |
| A.A. Yevtushenko, S.J. Matysiak, E.G. Ivanyk | ||
| Vol 51, No 4 (2003) | On the Movement of Granular Materials in Bins and Hoppers Part I: Two-Dimensional Problems | Abstract PDF |
| W. Szczepiński | ||
| Vol 51, No 4 (2003) | On The Movement of Granular Materials in Bins Part II: Three-Dimensional Problems | Abstract PDF |
| W. Szczepiński | ||
| Vol 53, No 1 (2005) | On the Peristaltic Transport of a Micropolar Fluid | Abstract PDF |
| K.N. DEY, S. PORIA, H.P. MAZUMDAR | ||
| Vol 48, No 1 (2000) | On the Problem of Bending of Transversally Isotropic Plates | Abstract PDF |
| V. Bozhydarnyk | ||
| Vol 47, No 3-4 (1999) | On the Propagation of Generalized Thermoelastic Vibrations in Plates | Abstract PDF |
| K.L. Verma, N. Hasebe | ||
| Vol 64, No 4 (2016) | On the Static Nature of Minimal Kinematic Boundary Conditions for Computational Homogenisation | Abstract PDF |
| Marek WOJCIECHOWSKI, Marek LEFIK | ||
| Vol 43, No 1-2 (1995) | On the Stress Distrubution in Bending of Strongly Anisotropic Beams | Abstract PDF |
| A. Blinowski, J. Ostrowska-Maciejewska | ||
| Vol 45, No 3-4 (1997) | On the Validity of Diffusion/Dispersion Tests in Soils | Abstract PDF |
| J.-L. Auriault, J. Lewandowska | ||
| Vol 65, No 1 (2017) | On Thermodynamically Consistent Form of Nonlinear Equations of the Cosserat Theory | Abstract PDF |
| Vladimir M. SADOVSKII | ||
| Vol 42, No 1-2 (1994) | Optimal Design of Mises Truss with Respect to Time to Creep Rapture | Abstract PDF |
| K. Szuwalski | ||
| Vol 42, No 1-2 (1994) | Optimal Design of Specimens for Pure Shear Tests of Sheet Metals | Abstract PDF |
| G. Socha | ||
| Vol 65, No 1 (2017) | Optimal Parameters of a Dynamically Loaded Patch/Layer Structure Against the Elastic-Brittle Interface Debonding | Abstract PDF |
| Jordanka IVANOVA, Tatyana PETROVA, Elisaveta KIRILOVA, Wilfried BECKER | ||
| Vol 49, No 2-3 (2001) | Optimal Three-Dimensional Correction of Idiopathic Scoliosis | Abstract PDF |
| T. Kotwicki, W. Marciniak | ||
| Vol 42, No 4 (1994) | Optimalization of the Form of a Building with an Arbitraty Base | Abstract PDF |
| M. Adamski | ||
| Vol 49, No 1 (2001) | Optimisation of Five-Link Suspension Mechanism of a Vehicle Solid Tyres | Abstract PDF |
| A. Grzyb, M. Kowalski | ||
| Vol 53, No 2 (2005) | Optimisation of Water Distribution Networks Design by Minimizing the Total Length | Abstract PDF |
| Y. LAHIOUEL, K. CHAOUI, L. KHEZZAR, A. HADDAD, Z. AZARI | ||
| Vol 51, No 1 (2003) | Optimisation Regarding Local Stability and Strength of Long Multilayered Plates Subjected to Compression | Abstract PDF |
| M. Królak, K. Kowal-Michalska, J. Świniarski | ||
| Vol 43, No 4 (1995) | Optimization of the Structure of a Multilayer Cylindrical Shell Under Stability Loss Conditions | Abstract PDF |
| G. Mielczarek | ||
| Vol 41, No 3-4 (1993) | Optimization of Thin-Walled Girders in Probabilistic Formulation | Abstract PDF |
| T. Gibczyńska, P. Bereza | ||
| Vol 46, No 1 (1998) | Optimization of Variable Thickness Plates by Genetic Algorithms | Abstract PDF |
| M. Pyrz | ||
| Vol 69, No 3 (2021) | Optimized Electroless Ni-Cu-P Coatings for Corrosion Protection of Steel Rebars from Pitting Attack of Chlorides | Abstract PDF |
| Arkadeb MUKHOPADHYAY, Sarmila SAHOO | ||
| Vol 64, No 4 (2016) | Osteophyte Development During Osteoarthritis (OA) – Consideration of Angiogenesis, Mechanical Loading and Tissue Microstructure | Abstract PDF |
| Ewa BEDNARCZYK, Tomasz LEKSZYCKI | ||
| Vol 57, No 1 (2009) | Parameter selection rules for elements of energy-absorbing structures | Abstract PDF |
| S. OCHELSKI, T. NIEZGODA | ||
| Vol 62, No 3 (2014) | Parameters’ Identification of Perzyna and Chaboche Viscoplastic Models for Aluminum Alloy at Temperature of 120ºC | Abstract PDF |
| Paweł KŁOSOWSKI, Anna MLECZEK | ||
| Vol 44, No 2 (1996) | Parametric Instability of Viscoelastic Nonlinear (Elastica) Columns | Abstract PDF |
| G. Cederbaum, G. Suire | ||
| Vol 63, No 2 (2015) | Parametric Studies of Directed Fragmentation Warhead Used for Combat Shaped Charges | Abstract PDF |
| Robert PANOWICZ, Jacek NOWAK, Marcin KONARZEWSKI, Tadeusz NIEZGODA | ||
| Vol 61, No 1 (2013) | Parametric Study of Numerically Modelled Delamination Process in a Composite Structure Subjected to Dynamic Loading | Abstract PDF |
| Łukasz MAZURKIEWICZ, Krzysztof DAMAZIAK, Jerzy MAŁACHOWSKI, Paweł BARANOWSKI | ||
| Vol 48, No 3 (2000) | Passive Control of a Beam Subject to Travelling Inertial Load | Abstract PDF |
| Cz. Bajer, R. Bogacz, Sz. Imiełowski | ||
| Vol 62, No 2 (2014) | PCR-DGGE Based Biodiveristy, Changeability and Genetic Similarity Analysis of Bacterial Community in Sequencing Batch Reactors Dealing with Reject Water | Abstract PDF |
| Aleksandra ZIEMBIŃSKA-BUCZYŃSKA, Grzegorz CEMA, Marta SZPINDOR, Anna MERESTA, Lesław PŁONKA | ||
| Vol 60, No 1 (2012) | Perforation Modes of Metal Plates Struck by a Blunt Rigid Projectile | Abstract PDF |
| Chen XIAOWEI, Liang GUANJUN | ||
| Vol 67, No 3 (2019) | Performance Evaluation and Frequency Response Analysis of a Two Stage Two Spool Electrohydraulic Servovalve with a Linearized Model | Abstract PDF |
| Nitesh MONDAL, Biswanath DATTA | ||
| Vol 50, No 1-2 (2002) | Periodic Solutions for a Kind of Nonlinear Oscillations by a New Asymptotic Approach | Abstract PDF |
| Ji-Huan He | ||
| Vol 46, No 3-4 (1998) | Perturbed Motions of a Rotating Symmetric Gyrostat | Abstract PDF |
| A.I. Ismail, T.S. Amer, M.O. Shaker | ||
| Vol 65, No 1 (2017) | Phase Transformation and Deformation Behavior of Steels with Different Content of Metastable Austenite | Abstract PDF |
| Matthias Walfred KLEIN, Robert SKORUPSKI, Marek SMAGA, Tilmann BECK | ||
| Vol 62, No 3 (2014) | Piotr Perzyna – Scientific Conductor within Theory of Thermo-Viscoplasticity | Abstract PDF |
| Adam GLEMA, Tomasz ŁODYGOWSKI, Wojciech SUMELKA | ||
| Vol 43, No 1-2 (1995) | Plane Contact of a Cylindrical Opening Stiffened by a Thin Shell | Abstract PDF |
| D. Bardzokas, G.E. Exadaktylos | ||
| Vol 65, No 1 (2017) | Planning, Monitoring and Control of Mechanics Projects by the BIM | Abstract PDF |
| Alonso CANDELARIO GARRIDO, Justo GARCÍA-SANZ-CALCEDO, David R. SALGADO, Alfonso G. GONZÁLEZ | ||
| Vol 44, No 3-4 (1996) | Plastic Analysis of Metal Surface Layers Undergoing the Roller Burnishing Process | Abstract PDF |
| W. Gambin | ||
| Vol 46, No 1 (1998) | Plastic Design of Elements of Bolt and Pin Joints Subjected to Compressive Loads | Abstract PDF |
| W. Zowczak | ||
| Vol 45, No 2 (1997) | Polar Flow Past a Spheroid | Abstract PDF |
| H. Ramkissoon | ||
| Vol 44, No 2 (1996) | Polynomial Boundary Perturbation for Optimal Plastic Design of Heads of Plane Tension Members | Abstract PDF |
| W. Egner | ||
| Vol 45, No 2 (1997) | Prediction of Concrete Properities Using Neural Networks | Abstract PDF |
| J. Kasperkiewicz | ||
| Vol 66, No 3 (2018) | Prediction of Surface Roughness of End Milling for Cycloidal Gears Based on Orthogonal Tests | Abstract PDF |
| Shan-Ming LUO, Long-Xing LIAO, Jing-Yu MO | ||
| Vol 62, No 1 (2014) | Preface | Abstract PDF |
| Ryszard PĘCHERSKI | ||
| Vol 62, No 4 (2014) | Preface | Abstract PDF |
| Alexis RUSINEK, Tomasz LODYGOWSKI | ||
| Vol 54, No 3 (2006) | Preface | Details PDF |
| Janusz Kowal | ||
| Vol 52, No 1-2 (2004) | Preface | Details PDF |
| Kazimierz Sobczyk | ||
| Vol 48, No 4 (2000) | Preface | Details PDF |
| Zenon Waszczyn | ||
| Vol 48, No 3 (2000) | Preface | Details PDF |
| Roman Bogacz | ||
| Vol 47, No 2 (1999) | Preface | Details PDF |
| Zenon Mróz | ||
| Vol 45, No 1 (1997) | Preface | Details PDF |
| Witold Kosiński | ||
| Vol 64, No 4 (2016) | Preface | Details PDF |
| Ryszard Bolesław PĘCHERSKI | ||
| Vol 65, No 2 (2017) | Preparation of a New AAC-Concrete Sandwich Block and its Compressive Behavior at Quasi-Static Loading | Abstract PDF |
| Farid ABED, Ahmed AIDAN, Taleb IBRAHIM, Nouran HEGAZI, Saif AL-DABAGH | ||
| Vol 68, No 4 (2020) | Pressure Drop Reduction in Fluid Flows with a Polymer Solution | Abstract PDF |
| Lawrence Chukwuka EDOMWONYI-OTU | ||
| Vol 63, No 4 (2015) | Prestressing Concrete Structures with CFRP Composite Tendons | Abstract PDF |
| Katarzyna Ryngier, Łukasz Zdanowicz | ||
| Vol 64, No 3 (2016) | Prestressing for Reduction of Local Vibrations in a Rotorcraft | Abstract PDF |
| Grzegorz SUWAŁA, Lech KNAP, Jan HOLNICKI-SZULC | ||
| Vol 64, No 1 (2016) | Probabilistic method to determine the overall rock block failure based on failure mode | Abstract PDF |
| Hongze ZHAO, Zequan LI, Chi Seng KONG | ||
| Vol 47, No 2 (1999) | Problems of Identification of Material Parameters for Different Types of Viscoplastic Constitutive Equations | Abstract PDF |
| P. Kłosowski, K. Woźnica | ||
| Vol 45, No 2 (1997) | Problems of Programming the Excavator Work Motions | Abstract PDF |
| L. Płonecki | ||
| Vol 56, No 2 (2008) | Professor Jan Oderfeld | Abstract PDF |
| K. KĘDZIORA | ||
| Vol 63, No 1 (2015) | Professor Krzysztof WILMAŃSKI | Abstract PDF |
| Mieczysław Sylwester KUCZMA, Tomasz ŁODYGOWSKI | ||
| Vol 62, No 3 (2014) | Professor Piotr PERZYNA | Abstract PDF |
| Ryszard PĘCHERSKI | ||
| Vol 61, No 3 (2013) | Professor Piotr Perzyna - in memoriam | Details PDF |
| Witold KOSIŃSKI, Zdzisław NOWAK, Ryszard PĘCHERSKI | ||
| Vol 50, No 4 (2002) | Progressive Failure Modelling of Transverse Cracking in Cross-Ply Laminates with Double-Edge-Semicircular Notches | Abstract PDF |
| C.J. Liu, A.H.J. Nijhof, L.J. Ernst, R. Marissen | ||
| Vol 69, No 3 (2021) | Properties of Binary Blended Cement Mortars Containing Glass Powder and Steel Slag Powder | Abstract PDF |
| Eethar Thanon DAWOOD, Marwa Saadi MHMOOD | ||
| Vol 50, No 1-2 (2002) | Pure Bending of the Orthotropic Elastic Rectangle | Abstract PDF |
| M. Kravchuk, W. Nagórko, A. Podhorecki | ||
| Vol 63, No 3 (2015) | Radial Vibrations of a Thick-Walled Spherical Reservoir Forced by an Internal Surge-Pressure in a Compressible Elastic Medium | Abstract PDF |
| Edward WŁODARCZYK, Bartosz FIKUS | ||
| Vol 43, No 1-2 (1995) | Rail on Linear Stochastics Supports | Abstract PDF |
| M. Moravčík | ||
| Vol 54, No 4 (2006) | Rayleigh waves speed in transversely isotropic material | Abstract PDF |
| A. Rehman, A. Khan, A. Ali | ||
| Vol 48, No 3 (2000) | Reduction of Train-Induced Vibration in Buildings | Abstract PDF |
| J.P. Talbot | ||
| Vol 49, No 2-3 (2001) | Relation Between the Mechanical Properties of Muscles and Their Structure on the Molecular Level | Abstract PDF |
| L. Kowalczyk | ||
| Vol 66, No 2 (2018) | Relaxation of Process-Induced Stresses in Composite Parts – Mixed Experimental-Numerical Approach | Abstract PDF |
| Anna Maria GALINSKA | ||
| Vol 49, No 4 (2001) | Reliability-Based Structural Optimization Accounting for Manufacturing and Material Quality | Abstract PDF |
| K. Doliński, R. Stocki | ||
| Vol 58, No 3-4 (2010) | Research on Influence of Impact of Microparticles and Sewing Needles on Destruction of Solid Bodies | Abstract PDF |
| B. D. KHRISTOFOROV | ||
| Vol 67, No 2 (2019) | Research on Influence of TiSi(N) Reflective Coating Thermal Resistance on Energy Absorption of Fireproof Textile Coupled with Auxetic Fabric | Abstract PDF |
| Danuta MIEDZIŃSKA, Michał STANKIEWICZ, Roman GIELETA, Konstanty MARSZAŁEK | ||
| Vol 61, No 1 (2013) | Research on the Durability of Adhesive Composites | Abstract PDF |
| Marek ROŚKOWICZ, Tomasz SMAL | ||
| Vol 56, No 1 (2008) | Resistance of Rc Annular Cross-Sections With Openings Subjected to Axial Force and Bending | Abstract PDF |
| M. LECHMAN | ||
| Vol 67, No 2 (2019) | Response Surfaces in the Numerical Homogenization of Non-Linear Porous Materials | Abstract PDF |
| Witold BELUCH, Marcin HATŁAS | ||
| Vol 47, No 2 (1999) | Restrained Flexure of Brittle-Matrix Composite Structures | Abstract PDF |
| M. Janas, J. Sokół-Supel | ||
| Vol 50, No 3 (2002) | Retrofit Analysis of Florida Beam-and-Post Reinforced Concrete Bridge Barriers | Abstract PDF |
| J.W. Wekezer, I. Kreja, M. Issa | ||
| Vol 59, No 3 (2011) | Reverse Ballistic Impact Studies of Thin Plate Perforation | Abstract PDF |
| L. C. FORDE, W. G. PROUD, S. M. WALLEY, P. D. CHURCH, R. CORNISH | ||
| Vol 57, No 3-4 (2009) | Review on spectral decomposition of Hooke’s tensor for all symmetry groups of linear elastic material | Abstract PDF |
| K. KOWALCZYK-GAJEWSKA, J. OSTROWSKA-MACIEJEWSKA | ||
| Vol 61, No 4 (2013) | Revisiting the Reflected Caustics Method: the Accurate Shape of the “Initial Curve” | Abstract PDF |
| Christos F. MARKIDES, Stavros K. KOURKOULIS | ||
| Vol 56, No 2 (2008) | Rigid Body Assembly Impact Models for Adiabatic Cutoff Equipments | Abstract PDF |
| M. MASSENZIO, S. PASHAH, E. JACQUELIN, A. BENNANI | ||
| Vol 44, No 3-4 (1996) | Robust Stability of Dynamical System | Abstract PDF |
| A. Ossowski | ||
| Vol 46, No 2 (1998) | Rocking-Sliding of a Rigid Block: Friction Influence on Free Motion | Abstract PDF |
| U. Andreaus, P. Casini | ||
| Vol 44, No 1 (1996) | Role of Thermal Treatment in Stress Failure of Concrete Differing in its Aggregate Grain Composition | Abstract PDF |
| J. Hoła | ||
| Vol 52, No 3 (2004) | Rolling Contact of Long Elastic Cylinders with Surface Roughness Described by a Two Parameter Model | Abstract PDF |
| V. Pauk, M. Woźniak | ||
| Vol 61, No 1 (2013) | Rubber Structure under Dynamic Loading – Computational Studies | Abstract PDF |
| Paweł BARANOWSKI, Roman GIELETA, Jerzy MAŁACHOWSKI, Łukasz MAZURKIEWICZ | ||
| Vol 46, No 3-4 (1998) | Rumbling in High Speed Passenger Trains | Abstract PDF |
| M. Meywerk | ||
| Vol 41, No 3-4 (1993) | Second-Order Strains of Lignostone Under Creep and Constitutive Equations | Abstract PDF |
| M. Czech | ||
| Vol 69, No 1 (2021) | Segmentation of Aggregate and Asphalt in Photographic Images of Pavements | Abstract PDF |
| Angela Marcela MEJÍA, Marco Aurelio ALZATE, Oscar Javier REYES-ORTIZ | ||
| Vol 68, No 4 (2020) | Segregation Effect on Solidification Cracking in Spot Welding of the 6XXX Aluminum | Abstract PDF |
| Andrés RAMIREZ, Jonathan GRACIANO-URIBE, Diego HINCAPIE ZULUGA, Edwar TORREZ LOPEZ | ||
| Vol 46, No 2 (1998) | Selected Cases of Bi-Area Contact for Cylindrical Elements | Abstract PDF |
| M. Czerniec, C. Komorzycki, R. Łucyszyn | ||
| Vol 60, No 1 (2012) | Selected Topics of High Speed Machining Analysis - Initial lecture for VIII International Conference HIGH SPEED MACHINING | Abstract PDF |
| Tomasz ŁODYGOWSKI, Alexis RUSINEK, Tomasz JANKOWIAK, Wojciech SUMELKA | ||
| Vol 60, No 4 (2012) | Selection of Shaped Charge Liner Material with the Use of Electromagnetic Expanding Ring Technique | Abstract PDF |
| Jacek JANISZEWSKI | ||
| Vol 64, No 4 (2016) | Self-Equilibrium Geometry of the Class-Theta Tetrahedral Tensegrity Module | Abstract PDF |
| Zbigniew Wojciech BIENIEK | ||
| Vol 54, No 3 (2006) | Self-Excited Vibrations Counteraction in Machine Tool — Cutting Process System Using Controllable Eliminator of Vibration | Abstract PDF |
| Marcin Chodźko, Krzysztof Marchelek, Arkadiusz Parus | ||
| Vol 48, No 3 (2000) | Semi-Empirical Model of Tire-Pavement Contact | Abstract PDF |
| P. Fundowicz, J. Wicher | ||
| Vol 58, No 1-2 (2010) | Sending hidden data through WWW pages: detection and prevention Engineering | Abstract PDF |
| L. POLAK, Z. KOTULSKI | ||
| Vol 56, No 1 (2008) | Sensitivity Analysis in a Fatigue Delamination Problem of an Elastic Two-Layer Composite | Abstract PDF |
| Ł. FIGIEL, B. LAUKE, M. KAMIŃSKI | ||
| Vol 48, No 4 (2000) | Sensitivity Analysis of the Bar Structures Reliability | Abstract PDF |
| R. Sieniawska, P. Śniady, S. Żukowski | ||
| Vol 43, No 1-2 (1995) | Shape Optimization of 2D Elastic Structures Using Adaptne Grids | Abstract PDF |
| W. Gutkowski, J. Zawidzka | ||
| Vol 63, No 4 (2015) | Shear Modulus of Elasticity for Thin-Walled Trapezoidal Corrugated Cores of Seven-Layer Sandwich Plates | Abstract PDF |
| Jerzy Lewiński, Ewa Magnucka-Blandzi, Wacław Szyc | ||
| Vol 40, No 1 (1992) | Shrinkage Stresses in Dried Materials | Abstract PDF |
| S.J. Kowalski, G. Musielak, A. Rybicki | ||
| Vol 49, No 2-3 (2001) | Significance of Bioceramics for Bone Surgery | Abstract PDF |
| A. Ślósarczyk | ||
| Vol 54, No 4 (2006) | Simple shear test in identification of constitutive behaviour of materials submitted to large deformations - hyperelastic materials caseF | Abstract |
| A. Ziółkowski | ||
| Vol 54, No 4 (2006) | Simple Shear Test in Identification of Constitutive Behaviour of Materials Submitted to Large Deformations — Hyperelastic Materials Case | Abstract PDF |
| A. Ziółkowski | ||
| Vol 42, No 1-2 (1994) | Simplified Model of Elastic-Plastic Wheel/Rail Interactions | Abstract PDF |
| W. Gambin | ||
| Vol 54, No 3 (2006) | Simulation Investigation of an Active Vibration Protection System of an Operator of a Hand-Held Percussive Tool | Abstract PDF |
| Zygmunt Basista | ||
| Vol 64, No 2 (2016) | Simulation of Deformation and Fracture Characteristics of a 45 Steel Taylor Impact Specimen | Abstract PDF |
| Gang CHEN, Xicheng HUANG | ||
| Vol 64, No 4 (2016) | Simulation of deposit growth onto recuperator tubes in pit furnaces. | Abstract PDF |
| Krzysztof WACŁAWIAK | ||
| Vol 57, No 3-4 (2009) | Simulations of combustion roar in turbulent attached and lifted turbulent methane jet flames | Abstract PDF |
| P. MARAZIOTI, P. KOUTMOS | ||
| Vol 64, No 4 (2016) | Simulations of thermal softening in large strain thermoplasticity | Abstract PDF |
| Balbina WCISŁO | ||
| Vol 65, No 1 (2017) | Simultaneous Design of Optimal Shape and Local Cubic Material Characteristics | Abstract PDF |
| Radosław CZUBACKI, Jean-Francois GANGHOFFER, Tomasz LEWIŃSKI | ||
| Vol 65, No 3 (2017) | Simultaneous Effects of Thermal Radiation and Chemical Reaction on Hydromagnetic Pulsatile Flow of a Casson Fluid in a Porous Space | Abstract PDF |
| Challa Kalyan KUMAR, Suripeddi SRINIVAS | ||
| Vol 41, No 2 (1993) | Solution for an Irregular Perturbation Problem of Viscoplastic Spherical Container Under Internal Pressure | Abstract PDF |
| W. Wojno | ||
| Vol 64, No 4 (2016) | Solution of the Three Forces Problem in a Case of Two Forces Being Mutually Orthogonal | Abstract PDF |
| Tomasz SOKÓŁ, Tomasz LEWIŃSKI | ||
| Vol 47, No 3-4 (1999) | Some Kinematically Admissible Velocity Fields in Multimaterial Extrusion | Abstract PDF |
| G.S. Mishuris, R.E. Śliwa | ||
| Vol 43, No 1-2 (1995) | Some New Developments in Contact Pressure Optimization | Abstract PDF |
| I. Páczelt | ||
| Vol 63, No 3 (2015) | Some Reliability Issues of the Corrugated I-Beam Girder | Abstract PDF |
| Damian SOKOŁOWSKI, Marcin Marek KAMIŃSKI | ||
| Vol 59, No 2 (2011) | Some Remarks on Burzyński’s Failure Criterion for Anisotropic Materials | Abstract PDF |
| P. SZEPTYŃSKI | ||
| Vol 68, No 1 (2020) | Spectral Quasilinearization Method for Solution of Convective Heating Condition | Abstract PDF |
| Wubshet IBRAHIM | ||
| Vol 51, No 4 (2003) | Stability and Ultimate Load of Three-Layered Plates – A Parametric Study | Abstract PDF |
| R. Grądzki, K. Kowal-Michalska | ||
| Vol 55, No 4 (2007) | Stability Constraints in Optimization of Cracked Columns Subjected to Compressive Follower Load | Abstract PDF |
| SZ. IMIEŁOWSKI, R. BOGACZ | ||
| Vol 46, No 1 (1998) | Stability Derivatives Cast in the Frame of Subsonic Unsteady Aerodynamics | Abstract PDF |
| M. Nowak | ||
| Vol 53, No 3 (2005) | Stability of an Elastic Column Subjected to Non-Stationary Compressive Loads | Abstract PDF |
| A. Ossowski | ||
| Vol 64, No 4 (2016) | Stability of an Imperfect Truss Loaded by Wind | Abstract PDF |
| Marcin KRAJEWSKI, Piotr IWICKI | ||
| Vol 65, No 1 (2017) | Stability of an Innovative Cold-Formed GEB Section | Abstract PDF |
| Agnieszka ŁUKOWICZ, Marcin KRAJEWSKI | ||
| Vol 47, No 3-4 (1999) | Stability of Slightly Wrinkled Plates Interacting with an Elastic Subsoil | Abstract PDF |
| B. Michalak | ||
| Vol 42, No 1-2 (1994) | Stability of the Cylindrical Panel. Experimental Investigations and Numerical Analysis | Abstract PDF |
| J. Marcinowski, D. Antoniak | ||
| Vol 64, No 1 (2016) | Static and free vibration analysis of thin plates of the curved edges by the Boundary Element Method considering an alternative formulation of boundary conditions | Abstract PDF |
| Michał Jan GUMINIAK | ||
| Vol 48, No 4 (2000) | Static and Stability Analysis of Shells with Large Displacements and Finite Rotations | Abstract PDF |
| J. Marcinowski | ||
| Vol 68, No 3 (2020) | Static Stability Analysis of Mass Sensors Consisting of Hygro-Thermally Activated Graphene Sheets Using a Nonlocal Strain Gradient Theory | Abstract PDF |
| Rajendran SELVAMANI, Madasamy MAHAVEER SREEJAYAN, Farzad EBRAHIMI | ||
| Vol 44, No 1 (1996) | Stationary and Oscillatory Flow of the Reiner-Rivlin Fluid Between Two External Rollers | Abstract PDF |
| M. Miksa | ||
| Vol 65, No 3 (2017) | Strain Energy Method for Determining Dynamic Yield Stress in Taylor’s Test | Abstract PDF |
| Edward WŁODARCZYK, Marcin SARZYŃSKI | ||
| Vol 56, No 4 (2008) | Strain hardening under non-proportional loading in polycrystalline aluminum alloys | Abstract PDF |
| W. OSIPIUK, K. ŁUKASZEWICZ | ||
| Vol 59, No 3 (2011) | Strain Rate Behaviour of Three Rocks in Tension | Abstract PDF |
| E. CADONI, S. ANTONIETTI, M. DOTTA, D. FORNI | ||
| Vol 65, No 3 (2017) | Strength Analysis of Typical Koepe Pulley Constructions Applied in Mine Hoisting Installations | Abstract PDF |
| Stanisław WOLNY, Bogusław ŁADECKI | ||
| Vol 65, No 1 (2017) | Strength Estimation of Teeth Reinforced with Different Types of Post Systems | Abstract PDF |
| Wojciech RYNIEWICZ, Anna Maria RYNIEWICZ, Tomasz MADEJ, Grażyna WIŚNIEWSKA | ||
| Vol 60, No 2 (2012) | Stress Analysis in Structural Components of the Koepe Pulley in Hoisting Installations | Abstract PDF |
| Stanisław WOLNY, Sławomir BADURA | ||
| Vol 45, No 1 (1997) | Stress Analysis in the Extrusion of Bimetallic Tubes | Abstract PDF |
| J.L. Alcaraz, J.M. Martínez-Esnaola, J. Gil-Sevillano | ||
| Vol 53, No 2 (2005) | Stress and Temperature Changes of Polymer Woven Belts Subjected to Mechanical Loading | Abstract PDF |
| S.P. GADAJ, Elżbieta A. PIECZYSKA, W.K. NOWACKI | ||
| Vol 52, No 1-2 (2004) | Stress Controlled Shape Optimization of 2D Elastic Structures | Abstract PDF |
| W. Gutkowski, J. Zawidzka, J. Zawidzki | ||
| Vol 44, No 3-4 (1996) | Stress Distribution in a Piezoceramic Disc Applied in Vibration Control of High-Rise Building | Abstract PDF |
| A. Das, K.C. Santra | ||
| Vol 62, No 2 (2014) | Stresses and Displacements in an Elliptically Perforated Circular Disc Under Radial Pressure | Abstract PDF |
| Christos F. MARKIDES, Stavros K. KOURKOULIS | ||
| Vol 45, No 3-4 (1997) | Stresses Distribution in a Magneto-Thermoelastic Medium with Cylindrical Hole | Abstract PDF |
| D. Chand | ||
| Vol 48, No 1 (2000) | Stresses in Viscoelastic Sphere Dried Convectively | Abstract PDF |
| J. Banaszak, S.J. Kowalski | ||
| Vol 61, No 3 (2013) | Structural Behavior of Sandwich Panels with External Deep-Profiled and Internal Soft Facing | Abstract PDF |
| Zbigniew POZORSKI, Rafał SÓL, Jacek SZAJDA, Jolanta BŁASZCZUK | ||
| Vol 55, No 3 (2007) | Structural Health Monitoring – a Review With the Emphasis on Low-Frequency Methods | Abstract PDF |
| P. KOŁAKOWSKI | ||
| Vol 47, No 1 (1999) | Structure Stability Under Multiparameter Loads | Abstract PDF |
| U. Radoń | ||
| Vol 46, No 3-4 (1998) | Studies of Failure of High–Strength Concrete | Abstract PDF |
| J. Hoła | ||
| Vol 40, No 1 (1992) | Studies of the Effect of Heat Treatment on Stress-Produced Failure in Compressed Concrete | Abstract PDF |
| J. Hoła | ||
| Vol 67, No 2 (2019) | Study of the Distribution of Normal Contact Pressure Between Parts Joined in a Multi-Bolted System under Operational Loads | Abstract PDF |
| Rafał GRZEJDA | ||
| Vol 57, No 3-4 (2009) | Study on Material Effort Hypotheses (selected passages from doctoral dissertation) | Abstract PDF |
| WŁODZIMIERZ BURZYNSKI | ||
| Vol 50, No 3 (2002) | Study On Normal Stresses In Composite Curved Beams Subjected To Unsymmetrical Bending | Abstract PDF |
| Aimin Yu | ||
| Vol 59, No 3 (2011) | SUBSCRIPTIONS | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 50, No 1-2 (2002) | Substantial Balance Equation of Internal Energy as Viewed by the Balance Theory | Abstract PDF |
| Z. Wrzesiński | ||
| Vol 48, No 3 (2000) | Suspension Dynamics and Pavement Wear | Abstract PDF |
| J. de Pont, B. Steven | ||
| Vol 61, No 4 (2013) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 61, No 3 (2013) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 61, No 2 (2013) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 61, No 1 (2013) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 60, No 4 (2012) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 60, No 3 (2012) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 60, No 2 (2012) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 60, No 1 (2012) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 59, No 4 (2011) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 56, No 4 (2008) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 56, No 3 (2008) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 56, No 2 (2008) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 56, No 1 (2008) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 55, No 4 (2007) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 55, No 3 (2007) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 55, No 2 (2007) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 55, No 1 (2007) | Table of Contents | Details PDF |
| Engineering Transactions Engineering Transactions | ||
| Vol 54, No 1 (2006) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 54, No 2 (2006) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 54, No 3 (2006) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 53, No 1 (2005) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 53, No 2 (2005) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 53, No 3 (2005) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 53, No 4 (2005) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 52, No 4 (2004) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 52, No 3 (2004) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 52, No 1-2 (2004) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 51, No 4 (2003) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 51, No 2-3 (2003) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 51, No 1 (2003) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 50, No 1-2 (2002) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 50, No 3 (2002) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 50, No 4 (2002) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 49, No 4 (2001) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 49, No 2-3 (2001) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 49, No 1 (2001) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 48, No 4 (2000) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 48, No 3 (2000) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 48, No 2 (2000) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 48, No 1 (2000) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 47, No 1 (1999) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 47, No 2 (1999) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 47, No 3-4 (1999) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 46, No 3-4 (1998) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 46, No 2 (1998) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 46, No 1 (1998) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 45, No 1 (1997) | Table of Contents | Details PDF |
| Engineering Transactions | ||
| Vol 68, No 2 (2020) | Temperature Influence on Non-Linear Harmonic Vibrations of Plates Made of Viscoelastic Materials | Abstract PDF |
| Przemysław LITEWKA, Roman LEWANDOWSKI | ||
| Online first | Texture Evolution of Magnesium Alloy AZ31B Subjected to Severe Plastic Deformation | Abstract PDF |
| Karol FRYDRYCH | ||
| Vol 43, No 1-2 (1995) | The 18G2A Steel (Construction Steel) Cyclic Behaviour in the Case of Complex Uniaxial Loading | Abstract PDF |
| E. Sender, W. Trąmpczyński | ||
| Vol 43, No 3 (1995) | The Analysis of Working Possibilities of a Power Shovel | Abstract |
| W. Gierulski, L. Płonecki, J. Cendrowicz | ||
| Vol 42, No 1-2 (1994) | The Choise of Feedback Gains in the Computer Model-Based Control Systems of the Direct-Drive Manipulator | Abstract PDF |
| Z. Kowalska | ||
| Vol 41, No 2 (1993) | The Compressive Bars with Bounded Displacement as the Task of Optimal Control | Abstract PDF |
| L. Mikulski | ||
| Vol 53, No 4 (2005) | The Effect of Aging on the Microstructure, Precipitation Response, and Fatigue Behaviour in an Al-Li-Cu Alloy | Abstract PDF |
| J. Fragomeni, R. Wheeler, K. V. Jata | ||
| Vol 40, No 1 (1992) | The Effect of Manufacturing Errors on the Stiffness of Rolling Contact Bearings | Abstract PDF |
| T.A. Stolarski | ||
| Vol 43, No 1-2 (1995) | The Effect of Masonry Cracks on the Composite Action Between Steel Lintels and Masonry Walls | Abstract PDF |
| S.J. Hardy | ||
| Vol 64, No 3 (2016) | The Effect of Process Parameters on Residual Stress in a Friction Stir Processed Cast Aluminium Alloy AlSi9Mg | Abstract PDF |
| Marek Stanislaw WĘGLOWSKI, Piotr SĘDEK, Carter HAMILTON | ||
| Vol 67, No 2 (2019) | The Effect of Strength Differential on Material Effort and Lifetime of Steam Turbine Rotors Under Thermo-Mechanical Load | Abstract PDF |
| Mariusz BANASZKIEWICZ, Waldemar DUDDA, Janusz BADUR | ||
| Vol 64, No 4 (2016) | The Effects of a Micro Hole in the First Convolution of a Bellows with Positive Rotation Angle on the Stress Behaviour | Abstract PDF |
| Jinbong KIM | ||
| Vol 42, No 4 (1994) | The Fast Crack Growth Analysis Under Dynamic Loading with the Help of Adina | Abstract PDF |
| L.V. Rokach, A. Neimitz | ||
| Vol 56, No 1 (2008) | The First Half-Turn of an Inertial Vibrator | Abstract PDF |
| G. CIEPLOK | ||
| Vol 63, No 1 (2015) | The Fourier Series Implementation Issues in the Tolerance Modeling of Thermal Conductivity of Periodic Composites | Abstract PDF |
| Dorota KULA, Ewaryst WIERZBICKI | ||
| Vol 48, No 4 (2000) | The Full Systems Method in Dynamics Problems of 3d Bodies | Abstract PDF |
| E.I. Bespalova, A.B. Kytaygorodsky | ||
| Vol 62, No 3 (2014) | The Identification Procedure for the Constitutive Model of Elasto-Viscoplasticity Describing the Behaviour of Nanocrystalline Titanium | Abstract PDF |
| Zdzisław NOWAK, Piotr PERZYNA | ||
| Vol 67, No 4 (2019) | The Impact of Temperature Oscillations and Heat Transfer Conditions in Thick-Walled Elbows and Tubes on the Local Stress-Strain Behaviour During the Fast Start-Up of Power Boilers | Abstract PDF |
| Jerzy OKRAJNI, Krzysztof WACŁAWIAK | ||
| Vol 63, No 2 (2015) | The Influence of Fly Ash Type on Properties of Cements Composites | Abstract PDF |
| Katarzyna SYNOWIEC | ||
| Vol 46, No 2 (1998) | The Influence of General Surface Loading on Penetration of a Circular Punch into an Elastic Stratum | Abstract PDF |
| B. Rogowski, D. Zaręba | ||
| Vol 67, No 2 (2019) | The Influence of High-Strength Bolts Stiffening on Flange Connection Behaviour | Abstract PDF |
| Izabela MAJOR, Maciej MAJOR, Krzysztof KULIŃSKI | ||
| Vol 52, No 4 (2004) | The Influence of Intralaminar Damage on Mechanical Properties of Composite Laminates | Abstract PDF |
| J. German | ||
| Vol 64, No 3 (2016) | The Initial Velocity of a Metal Plate Explosively-Launched from an Open-Faced Sandwich (OFS) | Abstract PDF |
| Edward WŁODARCZYK, Bartosz FIKUS | ||
| Vol 51, No 1 (2003) | The Investigation of the Influence of a Local Elastic Nonlinearity on Vibrations of Plane Truss Members | Abstract PDF |
| A. Pielorz | ||
| Vol 42, No 1-2 (1994) | The Method of Elimination of Vibrations and Forces Excited by Unbalanced Rotary Machines with Inaccesible Rotor | Abstract PDF |
| J. Michalczyk, G. Cieplok | ||
| Vol 63, No 2 (2015) | The Perzyna Viscoplastic Model in Dynamic Behaviour of Magnetorheological Fluid under High Strain Rates | Abstract PDF |
| Leszek FRĄŚ | ||
| Vol 43, No 4 (1995) | The Problem of Bending of Fibre Composite Viscoelastic Plates | Abstract PDF |
| M. Olejniczak | ||
| Vol 52, No 3 (2004) | The Quality of High-Performance Concretes as a Function of their Hardening Time | Abstract PDF |
| Aleksander Kapelko | ||
| Vol 40, No 1 (1992) | The Reissner - Sagoci Problem for Layered Orthotropic Elastic Media | Abstract PDF |
| B. Rogowski | ||
| Vol 65, No 1 (2017) | The Reliability Analysis of Sheet Pile Wall Located in Soil with Random Properties Based on CPTu Results | Abstract PDF |
| Marek KAWA, Irena BAGIŃSKA, Marek WYJADŁOWSKI | ||
| Vol 48, No 3 (2000) | The Response of Orthotropic Steel Decks to Traffic Loads | Abstract PDF |
| A.T. Dempsey, D.L. Keogh, B. Jacob, J. Carracilli | ||
| Vol 67, No 3 (2019) | The Role of the Bone Strength on the Cyst Growth in the Mandible | Abstract PDF |
| Justyna MIODOWSKA, Jan BIELSKI, Magdalena KROMKA-SZYDEK | ||
| Vol 59, No 2 (2011) | The Static and Dynamic Compressive Behaviour of Selected Aluminium Alloys | Abstract PDF |
| R. WINZER, A. GLINICKA | ||
| Vol 61, No 3 (2013) | The Structure Analysis of Secondary (Recycled) AlSi9Cu3 Cast Alloy with and without Heat Treatment | Abstract PDF |
| Lenka HURTALOVA, Eva TILLOVA, Maria CHALUPOVA | ||
| Vol 50, No 1-2 (2002) | The Substantial Balance of Internal Energy (IE) for Extensive Quantities as Viewed by the Balance Theory | Abstract PDF |
| Z. Wrzesiński | ||
| Vol 58, No 1-2 (2010) | The thermodynamical theory of elasto-viscoplasticity for description of nanocrystalline metals | Abstract PDF |
| P. PERZYNA | ||
| Vol 53, No 3 (2005) | The Thermodynamical Theory of Elasto-Yiscoplasticity (Review Paper) | Abstract PDF |
| P. Perzyna | ||
| Vol 45, No 1 (1997) | The Torsion with Bending Behaviour of a Tubular Truss | Abstract PDF |
| S. Okten, H. Kasap | ||
| Vol 62, No 1 (2014) | The Use of Computed Tomography and Ultrasonic Imaging for Assessment of Defects in Plates Made of a Polyesteric Resin | Abstract PDF |
| Daniela Ioana TUDOR, Stefan Dan PASTRAMA, Anton HADAR | ||
| Vol 42, No 1-2 (1994) | The Use of Transitional Elements for Stress Analysis of Structures with a Technological Surface Layer by the Method of Finite Elements | Abstract PDF |
| S. Kucharski | ||
| Vol 61, No 4 (2013) | The Validation of Fe Modeling of Orthogonal Turning Process Using Cowper–Symonds Material Behavior Law | Abstract PDF |
| Virginija GYLIENE, Vytautas OSTASEVICIUS | ||
| Vol 50, No 4 (2002) | Theoretical and Experimental Investigations of Braking Energy Recovery in Automobiles and Heavy Machinery | Abstract PDF |
| J. Ocioszyński | ||
| Vol 44, No 1 (1996) | Theoretical and Experimental Studies on Elasto-Plastic Deformation of an Element with Surface Layer | Abstract PDF |
| Z. Handzel-Powierża, S. Kucharski, G. Starzyński | ||
| Vol 67, No 4 (2019) | Theoretical and Numerical Analyses of an Aluminium-Concrete Composite Beam with Channel Shear Connectors | Abstract PDF |
| Łukasz POLUS, Maciej SZUMIGAŁA | ||
| Vol 64, No 2 (2016) | Theoretical and Numerical Study of the Flexural Behaviour of BFRP RC Beams | Abstract PDF |
| Dawid PAWŁOWSKI, Maciej SZUMIGAŁA | ||
| Vol 60, No 1 (2012) | Theoretical Basis of Determining the Translation and Rotation of Steering Wheel Stub Axle | Abstract PDF |
| Józef STRUSKI, Krzysztof WACH | ||
| Vol 56, No 3 (2008) | Theoretical foundations of the hypotheses of material effort | Abstract PDF |
| WŁODZIMIERZ BURZYŃSKI | ||
| Vol 65, No 2 (2017) | Theoretical Study on the Reinforcement Capacity of Cable Nets in Active Rockfall Protection System | Abstract PDF |
| Lianming CUI, Min WANG, Jianhu SUN, Zhaojun CHU | ||
| Vol 40, No 1 (1992) | Theory of the Wire-Drawing Die Design for the Film Lubrication Regime | Abstract PDF |
| G.L. Kolmogorov, V.X. Shevlyakov | ||
| Vol 66, No 3 (2018) | Thermal Instability Analysis of an Elastico-Viscous Nanofluid Layer | Abstract PDF |
| Ramesh CHAND, Gian C. RANA, Dolors PUIGJANER | ||
| Vol 64, No 3 (2016) | Thermal Instability of a Rivlin-Ericksen Nanofluid Saturated by a Darcy-Brinkman Porous Medium: a More Realistic Model | Abstract PDF |
| G. C. RANA, Ramesh CHAND, Veena SHARMA | ||
| Vol 44, No 1 (1996) | Thermal Instability of an Oldroydian Viscoelastic Fluid in Porous Medium | Abstract PDF |
| R.C. Sharma, P. Kumar | ||
| Vol 40, No 1 (1992) | Thermal Performance of Tilting-Pad Journal Bearing | Abstract PDF |
| T.A. Stolarski | ||
| Vol 41, No 3-4 (1993) | Thermodynamic Effects in the Tests on Dynamic Elongation of Polymer Composites | Abstract PDF |
| R. Gieleta, S. Ochelski | ||
| Vol 62, No 1 (2014) | Thermodynamic Method for Measuring the B/A Nonlinear Parameter Under High Pressure | Abstract PDF |
| Piotr KIEŁCZYŃSKI, Marek SZALEWSKI, Andrzej BALCERZAK, Krzysztof WIEJA, Aleksander J. ROSTOCKI, Ryszard M. SIEGOCZYŃSKI | ||
| Vol 50, No 3 (2002) | Thermodynamical Theory of Inelastic Single Crystals | Abstract PDF |
| Piotr Perzyna | ||
| Vol 68, No 3 (2020) | Thermodynamics Analysis of an MHD Casson Fluid Flow Through a Rotating Permeable Channel with Slip and Hall Effects | Abstract PDF |
| Adetayo Samuel EEGUNJOBI, Oluwole Daniel MAKINDE | ||
| Vol 50, No 1-2 (2002) | Thermodynamics of a Multicomponent Gaseous Phase as Viewed by the Balance Theory | Abstract PDF |
| Z. Wrzesiński | ||
| Vol 45, No 2 (1997) | Thermoelastic Effect During Tensile Cyclic Deformation | Abstract PDF |
| E.A. Pieczyska, S.P. Gadaj | ||
| Vol 42, No 4 (1994) | Thermoelastic Waves in a Transversely Isotropic Plate with Thermal Relaxations | Abstract PDF |
| D. Chand | ||
| Vol 68, No 1 (2020) | Three-Dimensional Analysis of Laminated Plates with Functionally Graded Layers by Two-Dimensional Numerical Model | Abstract PDF |
| Piotr PLUCIŃSKI, Jan JAŚKOWIEC | ||
| Vol 44, No 2 (1996) | Three-Dimensional Slip-Line Field Theory With Rotational Continuity | Abstract PDF |
| R. L. Bish | ||
| Vol 55, No 2 (2007) | Three-Parameter Optimization of an Axially Loaded Beam on a Foundation | Abstract PDF |
| A. S. FORYŚ, A. FORYŚ | ||
| Vol 66, No 4 (2018) | Tilt Measurements in Mechatronic Devices and Mobile Microrobots | Abstract PDF |
| Sergiusz ŁUCZAK | ||
| Vol 47, No 1 (1999) | Torsion of a Saint-Venant Cylinder with a Non-Simply Connected Cross-Section | Abstract PDF |
| T.F. Jabłoński, U. Andreaus | ||
| Vol 66, No 4 (2018) | Torsion of Functionally Graded Anisotropic Linearly Elastic Circular Cylinder | Abstract PDF |
| István ECSEDI, Attila BAKSA | ||
| Vol 49, No 2-3 (2001) | Torsional Rigidities of Cancellous Bone Filled with Marrow: The Application of Multipoint Pads Approximants | Abstract PDF |
| S. Tokarzewski, J.J. Telega, A. Gałka | ||
| Vol 42, No 3 (1994) | Torsional Vibration of a System with a Friction Clutch Under Random Torque Excitation | Abstract PDF |
| W. Kurnik, Z. Skup | ||
| Vol 65, No 2 (2017) | Transfer Effects on an Unsteady MHD Mixed Convective Flow Past a Vertical Plate with Chemical Reaction | Abstract PDF |
| R. Srinivasa RAJU | ||
| Vol 43, No 3 (1995) | Transient Free Convection Flow of an Elastico-Viscous Fluid Past an Infinite Vertical Plate | Abstract PDF |
| R. Deka, U.N. Das, V.M. Soundalgekar | ||
| Vol 47, No 3-4 (1999) | Transient Vibration of Unsteady Linear Closed Loop Systems | Abstract PDF |
| E. Wittbrodt, K.J. Kaliński | ||
| Vol 43, No 1-2 (1995) | Transport Equation for Shock Strenght in Hyperelastic Rods | Abstract PDF |
| S. Kosiński | ||
| Vol 43, No 4 (1995) | Transverse Deflection of a Cold-Worked Metal Plate Clamped Around Its Edge | Abstract PDF |
| R.L. Bish | ||
| Vol 51, No 2-3 (2003) | Traumatic Damage Pathomechanism of Cerebral Vessels Caused by Geriatric Changes | Abstract PDF |
| E. Wiczkowski, A. Kędzia, A. Kania | ||
| Vol 43, No 3 (1995) | Trigonometrical Representation of Transfer Matrix for Layered Elastic Material | Abstract PDF |
| Z. Wesołowski | ||
| Vol 65, No 1 (2017) | Two-Phase Isotropic Composites of Extremal Moduli. The Inverse Homogenization Problem | Abstract PDF |
| Tomasz ŁUKASIAK | ||
| Vol 63, No 1 (2015) | Two-Scale Modelling of Reactive Powder Concrete. Part III: Experimental Tests and Validation | Abstract PDF |
| Arkadiusz DENISIEWICZ, Mieczysław Sylwester KUCZMA | ||
| Vol 63, No 1 (2015) | Two-Scale Modelling of Reactive Powder Concrete. Part II: Numerical Simulations | Abstract PDF |
| Arkadiusz DENISIEWICZ, Mieczysław Sylwester KUCZMA | ||
| Vol 44, No 2 (1996) | Ultimate Load and Postfailure Behaviour of Box-Section Beams Under Pure Bending | Abstract PDF |
| M. Kotełko | ||
| Vol 41, No 1 (1993) | Ultrasonic Technique for Investigation of Residual Stresses in Cylindrical Forgings | Abstract PDF |
| J. Deputat, M. Adamski, J. Goljasz, J. Kalisiewicz | ||
| Vol 69, No 2 (2021) | Unsteady Flow Patterns between Two Egg-Carton Corrugated Plates | Abstract PDF |
| Benjamin GIRÓN-PALOMARES, Abel HERNÁNDEZ-GUERRERO, Ricardo ROMERO-MÉNDEZ, Qiang HE | ||
| Vol 65, No 1 (2017) | Validation of a New Hyperviscoelastic Model for Deformable Polymers Used for Joints between RC Frames and Masonry Infills | Abstract PDF |
| Arkadiusz KWIECIEŃ, Matija GAMS, Theodoros ROUSAKIS, Alberto VISKOVIC, Jože KORELC | ||
| Vol 64, No 1 (2016) | Validation of Computational Models of Steel-Concrete Composite Beams | Abstract PDF |
| Agnieszka PEŁKA-SAWENKO, Tomasz WRÓBLEWSKI, Maciej SZUMIGAŁA | ||
| Vol 57, No 2 (2009) | Variation of mechanical parameters of engineering materials under tension due to cyclic deformation by torsion | Abstract PDF |
| Z. L. KOWALEWSKI, T. SZYMCZAK | ||
| Vol 43, No 4 (1995) | Variational Modification of Žemočkin Contact Problems Solution Method | Abstract PDF |
| Z. Mistrikova, V. Slozka | ||
| Vol 48, No 3 (2000) | Vehicle Dynamics Model as Road Pavement Load Generator | Abstract PDF |
| Z. Lozia | ||
| Vol 60, No 2 (2012) | Velocity and Temperature Distributions Between Parallel Porous Plates with the Hall Effect and Variable Properties Under Exponential Decaying Pressure Gradient | Abstract PDF |
| Hazem Ali ATTIA, Mostafa A.M. ABDEEN | ||
| Vol 67, No 2 (2019) | Verification of Application of ANN Modelling in Study of Compressive Behaviour of Aluminium Sponges | Abstract PDF |
| Anna Małgorzata STRĘK, Marek DUDZIK, Arkadiusz KWIECIEŃ, Krzysztof WAŃCZYK, Barbara LIPOWSKA | ||
| Vol 67, No 2 (2019) | Vibrations of a Double-Beam System with Intermediate Elastic Restraints Due to a Moving Force | Abstract PDF |
| Filip ZAKĘŚ, Paweł ŚNIADY | ||
| Vol 64, No 3 (2016) | Vibrations of Circular Plate Supported on a Rigid Concentric Ring with Transnational Restraint Boundary | Abstract PDF |
| Lokavarapu Bhaskara RAO, Chellapilla Kameswara RAO | ||
| Vol 63, No 1 (2015) | Vibrations of Plate Strips with Internal Periodic Structure | Abstract PDF |
| Jakub MARCZAK, Jarosław JĘDRYSIAK | ||
| Vol 64, No 4 (2016) | Vibrations of Point-Supported Rectangular Thin Plate Subjected to a Moving Force | Abstract PDF |
| Filip ZAKĘŚ | ||
| Vol 54, No 4 (2006) | Vibrations of the three-layer shell with damping | Abstract PDF |
| K. Cabańska-Płaczkiewicz | ||
| Vol 56, No 3 (2008) | Vibrations of Timoshenko beams on two-parameter elas- tic soil | Abstract PDF |
| N. M. AUCIELLO | ||
| Vol 52, No 1-2 (2004) | Vibro-Impact Motion of Heavily Loaded Compact Hard Bodies | Abstract PDF |
| Z. Kowalska | ||
| Vol 67, No 2 (2019) | Virtual Additive Manufacturing Based on Semicrystalline Polymer Polyetheretherketone (PEEK) | Abstract PDF |
| Paweł BAJERSKI, Ryszard Bolesław PECHERSKI, Damian CHUDY | ||
| Vol 49, No 2-3 (2001) | Visco-Elastic Analysis of the Femur-Implant System by Using Finite Element Approach | Abstract PDF |
| S. Piszczatowski, K. Skalski | ||
| Vol 55, No 2 (2007) | Wave Polynomials in Elasticity Problems | Abstract PDF |
| A. MACIĄG | ||
| Vol 67, No 4 (2019) | Weakened Zones in Wood – Based Composite Beams and Their Strengthening by CFRP: Experimental, Theoretical, and Numerical Analysis | Abstract PDF |
| Krzysztof KULA, Tomasz SOCHA, Arkadiusz DENISIEWICZ | ||
| Vol 65, No 2 (2017) | Wear and Friction of Polymer Fiber Composites Coated by NiCr Alloy | Abstract PDF |
| Zainab RAHEEM, Aseel Ameer KAREEM | ||
| Vol 68, No 3 (2020) | Welding Process of CFRP and Metal: A Systematic Review | Abstract PDF |
| Xinchen QU, Hongjun LI | ||
| Vol 46, No 2 (1998) | Well- or Ill-Posed Problem of Parameter Identification –The Method of Analysis Applied in a Cassette Recorder Drive Modeling | Abstract PDF |
| Z. Kowalska | ||
| Vol 60, No 2 (2012) | Words of appreciation and acknowledgement to Professor Pierre Padilla | Details PDF |
| Editorial Committee Engineering Transactions | ||
| Vol 44, No 3-4 (1996) | Work-Hardening in Three-Dimensional Slip-Line Fields | Abstract PDF |
| R.L. Bish | ||
| Vol 56, No 4 (2008) | Włodzimierz Stanisław Trzywdar Burzyński (1900–1970) | Details PDF |
| Zbigniew S. OLESIAK | ||
| Vol 59, No 4 (2011) | YIELD CRITERION ACCOUNTING FOR THE INFLUENCE OF THE THIRD INVARIANT OF STRESS TENSOR DEVIATOR. PART II. ANALYSIS OF CONVEXITY CONDITION OF THE YIELD SURFACE | Abstract PDF |
| P. SZEPTYŃSKI | ||
| Vol 59, No 4 (2011) | YIELD CRITERION ACCOUNTING FOR THE THIRD INVARIANT OF STRESS TENSOR DEVIATOR. PART I. PROPOSITION OF THE YIELD CRITERION BASED ON THE CONCEPT OF INFLUENCE FUNCTIONS | Abstract PDF |
| M. NOWAK, J. OSTROWSKA-MACIEJEWSKA, R. B. PĘCHERSKI, P. SZEPTYŃSKI | ||
| Vol 49, No 4 (2001) | Yield Criterion of the Softwood under Conditions of Variable Humidity | Abstract PDF |
| M. Kowal, J. Mielniczuk | ||
| Vol 44, No 2 (1996) | Yield Stress Distribution in the Natural Surface Layer of Polycrystals | Abstract PDF |
| G. Starzyński, W. Gambin | ||
| Vol 49, No 1 (2001) | Yield Surfaces and Criteria of Plastic Yielding for a Strain Hardening Material. Part 1. Experimental Study | Abstract PDF |
| J. Miastkowski, R. Szczebiot | ||
| Vol 49, No 1 (2001) | Yield Surfaces and Criteria of Plastic Yielding for a Strain Hardening Material. Part 2. Theoretical Analysis | Abstract PDF |
| J. Miastkowski, R. Szczebiot | ||
| 501 - 827 of 827 Items | << < 1 2 | |
ISSN: 0867-888X (Print)
2450-8071 (Online)
2450-8071 (Online)