Properties of Binary Blended Cement Mortars Containing Glass Powder and Steel Slag Powder
Sabnis G.M., Green Building with Concrete, Sustainable Design and Construction, 2nd ed., CRC Press, Boca Raton, Florida, 2016.
Li. Z., Advanced Concrete Technology, John Wiley & Sons, Hoboken, New Jersey, 2011.
Belie N.D., Soutsos M., Gruyaert E. [Eds.], Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials, Springer International Publishing, 2018, doi: 10.1007/978-3-319-70606-1.
Siddique R., Waste Materials and By-Products in Concrete, Springer-Verlag, Berlin, Heidelberg, 2008, doi: 10.1007/978-3-540-74294-4.
Jani Y., Hogland W., Waste glass in the production of cement and concrete – A review, Journal of Environmental Chemical Engineering, 2(3): 1767–1775, 2014, doi: 10.1016/j.jece.2014.03.016.
Bignozzi M.C., Saccani A., Barbieri L, Lancellotti I., Glass waste as supplementary cementing materials: The effects of glass chemical composition, Cement & Concrete Composites, 55: 45–52, 2015, doi: 10.1016/j.cemconcomp.2014.07.020.
Patel D., Tiwari R.P., Shrivastava R., Yadav R.K., Effective utilization of waste glass powder as the substitution of cement in making paste and mortar, Construction and Building Materials, 199: 406–415, 2019, doi: 10.1016/j.conbuildmat.2018.12.017.
Vijayakumar G., Vishaliny H., Govindarajulu D., Studies on glass powder as partial replacement of cement in concrete production, International Journal of Emerging Technology and Advanced Engineering, 3(2): 153–157, 2013.
Nassar R.-U.D., Soroushian P., Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement, Construction and Building Materials, 29: 368–377, 2012, doi: 10.1016/j.conbuildmat.2011.10.061.
Tamanna N., Sutan N.M., Tuladhar R., Lee D.T.C., Yakub I., Pozzolanic properties of glass powder in cement paste, Journal of Civil Engineering, Science and Technology, 7(2): 75–81, 2016, doi: 10.33736/jcest.307.2016.
Matos A.M., Sousa-Coutinho J., Durability of mortar using waste glass powder as cement replacement, Construction and Building Materials, 36: 205–215, 2012, doi: 10.1016/j.conbuildmat.2012.04.027.
Ibrahim S., Meawad A., Assessment of waste packaging glass bottles as supplementary cementitious materials, Construction and Building Materials, 182: 451–458, 2018, doi: 10.1016/j.conbuildmat.2018.06.119.
Islam G.M.S., Rahman M.H., Kazi N., Waste glass powder as partial replacement of cement for sustainable concrete practice, International Journal of Sustainable Built Environment, 6(1): 37–44, 2017, doi: 10.1016/j.ijsbe.2016.10.005.
Aliabdo A.A., Abd Elmoaty A.M., Aboshama A.Y., Utilization of waste glass powder in the production of cement and concrete, Construction and Building Materials, 124: 866–877, 2016, doi: 10.1016/j.conbuildmat.2016.08.016.
ASTM C 618, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, Annual Book of ASTM Standards, 2003.
Shi C., Steel slag – its production, processing, characteristics, and cementitious properties, Journal of Materials in Civil Engineering, 16(3): 230–236, 2004, doi: 10.1061/(ASCE)0899-1561(2004)16:3(230).
Furlami E., Tonello G., Maschio S., Recycling of steel slag and glass cullet from energy saving lamps by fast firing production of ceramics, Waste Management, 30(8–9): 1714–1719, 2010, doi: 10.1016/j.wasman.2010.03.030.
Wang S., Wang C., Wang Q., Liu Z., Qian W., Jin C.Z., Chen L., Li L., Study on cementitious properties and hydration characteristics of steel slag, Polish Journal of Environmental Studies, 27(1): 357–364, 2018, doi: 10.15244/pjoes/74133.
Liu F., Chen M.Z., Li F.Z., Li Q.L., Wu S.P., Sang Y., Effect of ground steel slag powder on cement properties, Materials Research Innovations, 19(Sup 1): S1-150–S1-153, 2015, doi: 10.1179/1432891715Z.0000000001393.
Kourounis S., Tsivilis S., Tsakiridis P.E., Papadimitriou G.D., Tsibouki Z., Properties and hydration of blended cements with steelmaking slag, Cement and Concrete Research, 37(6): 815–822, 2007, doi: 10.1016/j.cemconres.2007.03.008.
Wang Q., Yan P., Feng J., A discussion on improving hydration activity of steel slag by altering its mineral compositions, Journal of Hazardous Materials, 186(2–3): 1070–1075, 2011, doi: 10.1016/j.jhazmat.2010.11.109.
Zhang X., Zhao S., Liu Z., Wang F., Utilization of steel slag in ultra-high performance concrete with enhanced eco-friendliness, Construction and Building Materials, 214: 28–36, 2019, doi: 10.1016/j.conbuildmat.2019.04.106.
Iraqi Standard Specification, Characteristics of OPC, Central Agency for Standardization and Quality Control, No. 5, 1984.
ASTM C 494, Standard Specification for Chemical Admixtures for Concrete, Annual Book of ASTM Standards, 2004.
Iraqi Standard, The Ruins of the natural Resources used in the Concrete and Construction, Central Agency for Standardization and Quality Control, No. 45, 1984.
ASTM C 989, Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars, Annual Book of ASTM Standards, 2019.
ASTM C 1437, Standard Test Method for Flow of Hydraulic Cement Mortar, Annual Book of ASTM Standards, 2019.
ASTM C 109, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens), Annual Book of ASTM Standards, 2020.
ASTM C 190, Standard Test Method for Tensile Strength of Hydraulic Cement Mortars, Annual Book of ASTM Standards, 1985.
ASTM C 642, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, Annual Book of ASTM Standards, 2013.
Zhu G., Hao Y., Xia C., Zhang Y., Hu T., Sun S., Study on cementitious properties of steel slag, Journal of Mining and Metallurgy, Section B: Metallurgy, 49(2): 217–224, 2013, doi: 10.2298/JMMB120810006Z.
Qiang W., Mengxiao S., Jun Y., Influence of classified steel slag with particle sizes smaller than 20 µm on the properties of cement and concrete, Construction and Building Materials, 123: 601–610, 2016, doi: 10.1016/j.conbuildmat.2016.07.042.
Li C.,, Xiao Y., Wu S., Chen Z., Wu S., Crack resistance of asphalt mixture with steel slag powder, Emerging Materials Research, 6(1): 214–218, 2017, doi: 10.1680/jemmr.16.00009.
Khaleel O.R., Abdul Razak H., The effect of powder type on the setting time and self compactability of mortar, Construction and Building Materials, 36: 20–26, 2012, doi: 10.1016/j.conbuildmat.2012.04.079.
Kwan A.K.H., Fung W.W.S., Wong H.H.C., Water film thickness, flowability and rheology of cement–sand mortar, Advances in Cement Research, 22(1): 3–14, 2010, doi: 10.1680/adcr.2008.22.1.3.
Mehdipour I., Khayat Kamal H., Effect of particle-size distribution and specific surface area of different binder systems on packing density and flow characteristics of cement paste, Cement and Concrete Composites, 78: 120-131, 2017, doi: 10.1016/j.cemconcomp.2017.01.005.
Fennis S.A.A.M., Walraven J.C., Using particle packing technology for sustainable concrete mixture design, HERON, 57(2): 73–101, 2012, http://heronjournal.nl/57-2/1.pdf.
Flatt R., Schober I., Superplasticizers and the Rheology of Concrete,[in:] Understanding the Rheology of Concrete, Roussel N. [Ed.], Woodhead Publishing in Civil and Structural Engineering, pp. 144–208, 2012, doi: 10.1533/9780857095282.2.144.
Lu J.-X., Duan Z.-H., Poon C.S., Fresh properties of cement pastes or mortars incorporating waste glass powder and cullet, Construction and Building Materials, 131: 793–799, 2017, doi: 10.1016/j.conbuildmat.2016.11.011.
Hea Z.-H., Zhan P.-M., Du S.-G., Liu B.-J., Yuan W.-B., Creep behavior of concrete containing glass powder, Composites Part B: Engineering, 166: 13–20, 2019, doi: 10.1016/j.compositesb.2018.11.133.
Lothenbach B., Scrivener K., Hooton R.D., Supplementary cementitious materials, Cement and Concrete Research, 41(12): 1244–1256, 2011, doi: 10.1016/j.cemconres.2010.12.001.
Peng Y., Hu S., Ding Q., Dense packing properties of mineral admixtures in cementitious material, Particuology, 7(5): 399–402, 2009, doi: 10.1016/j.partic.2009.06.003.
Aïtcin P.-C., 17 – The Influence of the water/cement ratio on the sustainability of concrete, [in:] Lea's Chemistry of Cement and Concrete (5th ed.), Hewlett P.C., Liska M. [Eds], Butterworth-Heinemann, pp. 807–826, 2019, doi: 10.1016/B978-0-08-100773-0.00017-4.
Copyright © 2014 by Institute of Fundamental Technological Research
Polish Academy of Sciences, Warsaw, Poland